Take a seat and be comfortable in this elegant Imperial Game Chair. It comes in a beautiful antique walnut stain finish with cushion seats and back rest. It features a gas tilt, swivel mechanism and casters to allow you to move back and forth with ease. This game chair also features:
- Antique Walnut Stain Finish
- Cushioned Seat and Back Rest
- Gas Tilt and Swivel Mechanism
- Fits Inside and Matches the Style of Our Imperial Multi Game Table (IMI00013)
Overall Rating for Imperial Game Chair - Antique Walnut
|(based on 1 review)|
Very nice chairs
By Roger Winters from VA, USA on November 14, 2012
I was very pleased with the 8 chairs I ordered. It took some time to assemble them but it was not difficult. Instead of using the allen wrench it came with I happened to have a drill bit that had an allen wrench end of the exact same size, it made assembly go much faster using the drill on low speed where the drill could reach. I used the allen wrench elsewhere. One tip: The seat came with bolts to attach the seat to the seat base but the seat was already attached so the bolts were not needed. However, the arms attach to the back with shorter bolts however a couple of them had the recessed bolt insert too deep for the short bolts to reach so I used the longer bolts that were not needed and they worked great. Also, don't tighten any of the arm bolts until all of them are partially screwed in, assembly will be easier. Overall I'm very satified with the chairs so far. To ensure the wheels would not scratch my laminated flooring I placed a piece of medium sandpaper against the inside of each wheel and spun each wheel a few times to smooth any edge roughness. If you are using on carpet you will not have this situation.
I would recommend this item to a friend.